AlmaLinux 9.4 and AlmaLinux 8.10 are both stable! Checkout AlmaLinux OS 9.4 Stable a AlmaLinux OS 8.10 Stable for more information!

Building Pantheon Desktop Environment

profile
Sofia Boldyreva

Technical Writer for AlmaLinux OS Project

Building Pantheon Desktop Environment

Hello, AlmaLinux Community! Let me start off by introducing myself - my name is Sonia, and I’m a Technical Writer for AlmaLinux OS Project. In this blog post, I’m describing one of the ways that I have contributed to AlmaLinux recently. With much learning, I have successfully ported the Pantheon desktop environment to AlmaLinux 9.

The Idea

Several key factors contributed to the successful integration of AlmaLinux with the Pantheon desktop environment:

  1. The desire to broaden and diversify the spectrum of AlmaLinux Desktop Environments variants.
  2. The aesthetic appeal of the Pantheon desktop environment, which I found to be quite visually pleasing.
  3. As a newcomer to this technical domain, the project offered a unique opportunity to expand my knowledge and skillset.
  4. The entire process was an enjoyable and engaging experience.

These reasons provided a solid foundation for embarking on the AlmaLinux Pantheon project. My journey demonstrates that contributing to open-source projects is achievable at any stage without requiring extensive expertise in Linux or programming.

Now, it’s time to delve into the various stages of the development process.

Preparations and Requirements

Researching the Pantheon Desktop Environment

I used my Fedora machine and installed the Pantheon desktop environment to take a peek at what the packages included. During this phase also I compared a list of Fedora Pantheon SIG packages that I found on the Internet with what I saw having been installed. As I used this install as inspiration, I was mostly focused on rebuilding the Fedora 36 packages.

The next stage was to rebuild those packages for AlmaLinux.

Requirements for rebuilding

  • AlmaLinux 9 machine - as I started my experiment with rebuilding the packages locally, I didn’t need much. A bare AlmaLinux 9 machine was enough.
  • Installed git - using the dnf install git-all.
  • mock tool - I followed the AlmaLinux Building Packages Guide to install mock and use it.

Enabling repositories

Basic research of required Pantheon packages and rebuilding them locally defined that I needed a few extra repositories to be enabled. These repositories may contain some auxiliary packages that might be needed since I don’t want to build packages that AlmaLinux already has.

The enabling commands were taken from the AlmaLinux Wiki Repositories page unless otherwise noted.

  • EPEL repo
  • PowerTools (CRB) repo
  • Devel repo
    • I didn’t enable this repo server-wide with the dnf config-manager --set-enabled command. Devel repo is more like an internal repo and it’s not supposed to be enabled on a regular basis. Instead, I enabled it in the mock configuration, as you will see below. To do this I made some changes in the AlmaLinux template in /etc/mock/templates to set up the devel repository as enabled.

Creating my local repository

I needed to install some additional tools before building my packages. That’s where creating and using a local repo helped me.

I started by following these instructions, that should work for most Red Hat-based systems:

  • Install the createrepo tool - Note: this was already installed in my environment when I installed mock:

    dnf install createrepo_c
    
  • Create your new repository directory:

    mkdir -p /path/to/repository
    
  • Copy needed rpms to this directory. In my case, I didn’t have any rpms built yet to copy. Instead, I was just using the --resultid /path/to/repo argument in the mock command to build the packages directly to the local repo folder.

  • Run createrepo_с command:

    createrepo_c /path/to/repository
    
  • Each time there’s a new package in your local repo folder, run the following command to update the repo:

    createrepo_c .
    
  • Now there’s an important detail. As opposed to the random internet instruction, I didn’t create my repo’s config in the /etc/yum.repos.d directory. This didn’t really work for my purposes. Instead, I followed the advice of Andrew, our Build SIG leader, here and created a new version of the mock config in /etc/mock/ with the necessary modifications:

    include('almalinux-9-x86_64.cfg')
    include('templates/epel-9.tpl')
    
    # in this block you can see my changes 
    config_opts['yum.conf'] += """
    [el]
    name=el
    baseurl=file:///path/to/repo
    enabled=1
    gpgcheck=0
    """
    
    config_opts['root'] = "alma+epel-9-{{ target_arch }}-local"
    config_opts['description'] = 'AlmaLinux 9 + EPEL'
    

Rebuilding packages

Of course, I faced a number of issues while building packages with the mock tool. Some of the packages demanded changes in spec files - for example, to put changes to match AlmaLinux packages versions. And for some packages, I had to build other versions. But I tried to note the changes that were required below.

PackageComment
elementary-calculator
elementary-calendar
elementary-camera
elementary-capnet-assist
elementary-codeelementary-code spec changes: Replaced libvala required version to 0.48 to match AlmaLinux 9 repositories
elementary-files
elementary-greeterelementary-greeter spec changes: replaced required mutter-clutter, mutter-cogl-pango, mutter-cogl from 10 to 8 to match AlmaLinux 9 repos
elementary-icon-theme
elementary-music
elementary-onboarding
elementary-photos
elementary-print
elementary-screenshot-tool
elementary-shortcut-overlay
elementary-sound-theme
elementary-tasks
elementary-terminal
elementary-theme
elementary-videos
elementary-wallpapers
galagala spec changes: elementary-greeter spec changes: replaced required mutter-clutter, mutter-cogl-pango, mutter-cogl from 10 to 8 to match AlmaLinux 9 repos
granite
folks
telepathy-glib
telepathy-filesystem
python-dbusmock
bamf
xcursorgen
libgda
libchamplain
vala
libgpod
zeitgeist
dee
goocanvas2
rarian
mdbtools
impallari-raleway-fonts
pantheon-agent-geoclue2
pantheon-agent-polkit
pantheon-session-settings
plankplank spec changes:
- remove BuildRequires: libbamf3
- add BuildRequires: bamf-devel
- add Requires: bamf
switchboard
switchboard-plug-a11y
switchboard-plug-about
switchboard-plug-applications
switchboard-plug-bluetooth
switchboard-plug-display
switchboard-plug-keyboard
switchboard-plug-mouse-touchpad
switchboard-plug-networking
switchboard-plug-notifications
switchboard-plug-onlineaccounts
switchboard-plug-pantheon-shell
switchboard-plug-printers
switchboard-plug-sharing
rygel
gst-editing-services
gupnp-av
gupnp-dlna
switchboard-plug-sound
switchboard-plug-tweaks
wingpanelwingpanel spec changes: elementary-greeter spec changes: replaced required mutter-clutter, mutter-cogl-pango, mutter-cogl from 10 to 8 to match AlmaLinux 9 repos
wingpanel-applications-menu
wingpanel-indicator-bluetooth
wingpanel-indicator-datetime
wingpanel-indicator-keyboard
wingpanel-indicator-network
wingpanel-indicator-nightlight
wingpanel-indicator-notifications
wingpanel-indicator-power
wingpanel-indicator-session
wingpanel-indicator-sound
elementary-mail
elementary-notifications
elementary-planner
elementary-settings-daemon
elementary-sideload
elementary-xfce-icon-theme
libxcvt
libglib-testing
libadwaita
malcontent

When I had all the necessary packages built and installed, I could enjoy the new look of AlmaLinux!

AlmaLinux-9-Pantheon

Now that I ensured that it actually does work with AlmaLinux, it was time to proceed with the next step - build these packages with AlmaLinux Build System.

Uploading sources to AlmaLinux Git Service

I was guided to add all the package sources directly to the AlmaLinux Git Service.

Getting the AlmaLinux Git Service Utility

The AlmaLinux Git Service Utility is a tool that is being used to house AlmaLinux package sources.

I followed these simple instructions on how to use the AlmaLinux Git Service Utility to upload sources.

  • Clone the repository https://git.almalinux.org/almalinux/almalinux-git-utils

  • Switch to the repository’s directory and install the utility: python3 setup.py install

  • I used the alma_blob_upload utility script to upload the sources.

    Note: Run alma_blob_upload -h or check the instruction to learn how to use the script.

  • Install AWS-CLI and add credentials.

    Note: Using the AWS-CLI utility requires having AWS credentials (which were kindly provided to me by Elkhan Mammadli, AlmaLinux Cloud SIG leader)

Now everything is ready to upload the sources.

  • Navigate the browser to https://git.almalinux.org/.
  • Login using the GitHub account.
  • Upload your sources - I was granted the “AlmaLinux Team member” access so I was able to upload my sources as AlmaLinux sources.
  • Create a new repository - the repository’s name is after the .spec file. This is also the project’s name.

Back on your AlmaLinux computer

  • Clone the empty repository that you just created and switch to its directory.
  • Create a .gitignore file
    touch .gitignore
    
  • Create SPECS and SOURCES folders in the project’s directory.
     mkdir SPECS 
     mkdir SOURCES
    
  • Switch to the /project-name/SOURCES directory and place the .src.rpm file there - I used source rpms that I got as a result of rebuilding the package locally.
  • Run the following command to extract contents:
    rpm2cpio %src.rpm_file_name | cpio -i 
    
  • You can then delete .src.rpm file.
  • Move .spec file to the /project-name/SPECS directory.
  • Switch to the project’s directory and add the extracted .tar archive file to the .gitignore file like this:
    SOURCES/archive_file_name
    
  • Upload the source using the alma_blob_upload script:
    alma_blob_upload -f SOURCES/archive_file_name -o .project_name.metadata
    
  • Add the files for the commit:
    git add * .gitignore .project_name.metadata
    
  • Send the commit and push the changes.
     git push
    
  • Go back to the repository in the browser to check that everything’s uploaded and in place. I also renamed the branch name to include a9 in Settings to make it more clear that this package was for AlmaLinux OS 9.

Revamping Packages with AlmaLinux Build System

Once the source is uploaded, the AlmaLinux Build System can be utilized to build the package. I adhered to the guidelines for creating my own community repository, initiating new builds using the “add a project from git.almalinux.org” option, and incorporating the build into the community repository.

The AlmaLinux-Pantheon Community Repository can be installed to access the AlmaLinux 9 required packages for all 4 supported architectures.

Installing Pantheon

To install Pantheon desktop packages you need to enable a few additional repos:

  • PowerTools/CRB and EPEL - check the wiki for commands.

  • Community repo

    • Install core dnf plugins that contains COPR plugin
      dnf install dnf-plugins-core
    
    • Download AlmaLinux configuration file in your system
      curl -o /etc/dnf/plugins/copr.d/almalinux.conf \
      https://raw.githubusercontent.com/AlmaLinux/albs-web-server/master/reference_data/almalinux.conf
    
    • Enable Pantheon community repo
      dnf copr --hub build.almalinux.org enable sboldyreva/Pantheon-group
    
  • Now simply run the following command to install packages and enjoy the new desktop environment:

    dnf group install "Pantheon Desktop" 
    

Wrapping Up with Enthusiasm: Test, Contribute, and Collaborate!

As we conclude, I’m thrilled to invite you all to test and explore the fresh new look of AlmaLinux! Join the conversation in the Mattermost chat, share your feedback, and let’s work together to refine and enhance this exciting desktop experience. Let’s make it even better together!

Acknowledgments

It’s important to me that I also note that I was not alone in this endeavor - I received invaluable support from AlmaLinux engineers, Andrew Lukoshko and Eduard Abdullin. Also, a thank you to the AlmaLinux Evangelist, Pawel Suchanecki, whose assistance helped me to create this article.